Ion-Air blower IB

HAUG’s Ion-Air blower is based on the concept of a proven ionization technique. Negative and positive ions are added to the air flow produced by a cross-flow blower. The air flow hence becomes conductive and is able to eliminate electrostatic surface charges on non-conductive material.

Low operating costs

The Ion-Air blower operates on a low pressure principle and does not require costly compressed air. The power supply, which is required to feed the ionzing bar with high voltage, also operates on a low energy consumption level. This makes the Ion-Air blower a very efficient ionizing system, especially for applications where constant ionization is required.

Applications

  • on winding and unwinding systems (especially films and foil)
  • on injection moulds and their handling systems
  • in the production of circuit boards
  • in the electronic industry
  • in the plastics and packaging industry

Increasing the effective length

The Ion-Air blower becomes very flexible when a larger operating length is required. Several units can be “daisy-chained” in series. In this case, only one ionizing bar and one power pack is required (other lengths are also available on request).

Technical data

Types IB 115 V
230 V		 Order-No.: 04.0350.000
Order-No.: 04.0351.000
Length 457 mm, 2,7 kg
max. bar length 380 mm
IB 115 V
230 V		 Order-No.: 04.0350.001
Order-No.: 04.0351.001
Length 813 mm, 3,6 kg
max. bar length 780 mm
IB 115 V
230 V		 Order-No.: 04.0350.002
Order-No.: 04.0351.002
Length 1549 mm, 7,0 kg
max. bar length 1510 mm
without power pack, without HV-cable, without ionizing bar (round version)

Unit with 2 retaining holders, adjustable screws and base
Dimensions (H x W) 95 x 105 mm (H x W)
Supply voltage 115 V~ / 230 V~ (50–60 Hz)
Power consumption 70 VA (Length 457 mm)
150 VA (Length 813 mm)
220 VA (Length 1549 mm)
Operating temperature +5 °C to +50 °C
Storage/transport temperature -15 °C to +60 °C

Subject to technical changes!

Accessories

Bracket links Order-No.: X-3312
Bracket rechts Order-No.: X-3313


Suitable Power packs

Connectable lengths
(ionizing unit incl.
high-voltage cable)		 EN SL max. 5 m
EN SL LC / EN SL RLC max. 10 m
EN 8 / EN 8 LC max. 18 m
Multistat max. 18 m
EN 70 / EN 70 LC max. 2 x 18 m


Technical illustration