Charging generators

HAUG-Charging systems

HAUG charging systems are designed to apply electrostatic charges without physical contact. These systems can be used for any application where different materials are to be pinned together electrostatically. At least, one of these materials must be non-conductive. The electrostatic pinning serves to enhance subsequent processes, such as film/foil overlapping in packaging machines.

All HAUG charging generators are available with positive or negative polarity.

Applications

HAUG charging systems can be used, among others, in the following applications:

for fixing and positioning films and foils, paper and cardboard, e.g. on steel sheets, glass panels, wood panels or similar;
for fixing films and foils on packaging machines / film welding machines;
for fixing films and foils on turrent film winders, for fixing the wound film against telescoping and glue-less commencement of the film winding process on cardboard tubes.

Charging generator AG SL

The output of this low-priced generator is set by modifying the distance of the electrodes. The AG SL has one high-voltage connection (DC).

The output voltage is displayed by means of an analog measuring instrument.

Charging generator AG 25

This unit has been tested and proven thousands of times. It is suitable for all common applications.

The generator AG 25 is equipped with one high-voltage connection (DC). The electronic voltage adjustment is stepless, and there is a choice of analog or digital display integrated into the unit for the output voltage.

Charging generator AG 30

This charging generator produces an adjustable high voltage of up to 40 kV_DC. The voltage and the current present at the relevant time are indicated at the integrated measuring instruments. Two separate potentiometers allow the high voltage and the current threshold to be set. If the current exceeeds the set limit value, an error message is triggered and the high voltage is switched off. The charging generator AG 30 can be pulsed externally.

The integrated signaling socket can be used to control a signaling device. The AG 30 is available optionally with analog or digital display.

Charging generator AG 35

Beside its two high-voltage connections for the charging section, this unit also offers a discharge section with four high-voltage connections and electronic fault and performance monitor. The electronic voltage adjustment is stepless, and there is an analog voltage output display integrated into the unit.

Charging generator AG 60

This generator includes the charging section of an AG 30 and a discharging section with an electronic fault and performance monitor for the discharge unit.

The AG 60 can be pulsed externally.

Technical data AG SL / AG 25

Dimensions	269 x 168 x 150 mm (L x W x H)
Protection Type	IP 54
Protection class	I
Supply voltage	115 V_AC / 230 V_AC (50 – 60 Hz)
Power consumption	approx. 50 VA
Output-voltage charging	approx. 25 kV_DC
Short-circuit output current charging	(l_k) ≤ 1,1 mA
HV-terminals charging	1
Operating temperature	+5 °C to +45 °C
Storage/transport temperature	-15 °C to +60 °C
Weight	7 kg
Mains cable	2,6 m; fixed to the device

Subject to technical changes!

Technical data AG 30

Dimensions	390 x 280 x 210 mm (L x B x H)
Protection Type	IP 54
Protection class	I
Supply voltage	115 V_AC / 230 V_AC (50 – 60 Hz)
Power consumption	approx. 60 VA
Output-voltage charging	approx. 40 kV_DC
Short-circuit output current charging	(l_k) ≤ 4,5 mA
Capacity of signaling contacts	24 V_AC / 35 V_DC; max. 50 mA
Pulse frequency via pulse input	max 1 Hz (max. 10⁶ Zyklen)
HV-terminals charging	2
Operating temperature	+5 °C to +45 °C
Storage/transport temperature	-15 °C to +60 °C
Weight	3,5 kg
Mains cable	2,6 m; fixed to the device

Subject to technical changes!

Accessories AG 30

Round plug		Order-No.: X-0616
Angled plug		Order-No.: X-5718
Signaling cable K1, shielded, incl. round plug	5 m	Order-No.: 06.8941.000
	10 m	Order-No.: 06.8941.001
	20 m	Order-No.: 06.8941.002

Technical data AG 35

Dimensions	390 x 280 x 210 mm (L x B x H)
Protection Type	IP 54
Protection class	I
Supply voltage	115 V_AC / 230 V_AC (50 – 60 Hz)
Power consumption	approx. 100 VA
Output-voltage charging discharging	approx. 40 kV_DC approx. 7-8 kV_AC
Short-circuit output current charging discharging	(l_k) ≤ 0,8 mA (l_k) ≤ 5 mA
HV-terminals charging discharging	2 4
Connectable length (discharging)	max. 18 m (ionizing unit incl. HV-cable)
Operating temperature	+5 °C to +45 °C
Storage/transport temperature	-15 °C to +60 °C
Weight	14 kg
Mains cable	2,6 m; fixed to the device

Subject to technical changes!

Accessories AG 35

Round plug		Order-No.: X-0616
Angled plug		Order-No.: X-5718
Signalling cable K1 shielded incl. Round plug	5 m	Order-No.: 06.8941.000
	10 m	Order-No.: 06.8941.001
	20 m	Order-No.: 06.8941.002

Technical data AG 60

Dimensions	390 x 280 x 210 mm (L x B x H)
Protection Type	IP 54
Protection class	I
Supply voltage	115 V_AC / 230 V_AC (50 – 60 Hz)
Power consumption	approx. 140 VA
Output-voltage charging discharging	approx. 40 kV_DC approx. 7-8 kV_AC
Short-circuit output current charging discharging	(l_k) ≤ 4,5 mA (l_k) ≤ 5 mA
Load rating of signalling contacts	24 V_AC / 35 V_DC; max. 50 mA
Pulse frequency via pulse input	max 1 Hz (max. 10⁶ Zyklen)
HV-terminals charging discharging	2 4
Connectable length (discharging)	max. 18 m (ionizing unit incl. HV-cable)
Operating temperature	+5 °C to +45 °C
Storage/transport temperature	-15 °C to +60 °C
Weight	16 kg
Mains cable	2,6 m; fixed to the device

Subject to technical changes!

Accessories AG 60

Round plug		Order-No.: X-0616
Angled plug		Order-No.: X-5718
Signalling cable K1 shielded incl. Round plug	5 m	Order-No.: 06.8941.000
	10 m	Order-No.: 06.8941.001
	20 m	Order-No.: 06.8941.002